Filtration

Why Are Filters, Diffusers and Vents Needed Within the Microelectronics Industries?

Microelectronics are an inescapable and critical part of nearly every person's life.

Where Are Filters, Diffusers and Vents Needed Within the Microelectronics Industries?

Without highly efficient filtration at sub-micron particle sizes, these microelectronics technologies would be difficult if not impossible. Specific gas filters protect critical processes that require a particle free environment to manufacture devices with nearly nanoscale features.

Submitted by Norm Hall || Valin Corporation
Hilco Oil Reclamation System

Investing in oil reclamation technology can help reduce the costs associated with oil usage. Learn more in the blog below.

Submitted by Greg Neneman || Valin Corporation
Filtration Still a Major Concern for Peaker Plants

As alternative energy becomes more widespread, peaker plants continue to grow in popularity.  Many plants in operation can count on solar energy during the day, while relying on peaker energy during the evening. 

On-Site Nitrogen Gas Generation for the Brewing Industry

On-site nitrogen gas generators produce a continuous supply of ultrapure, food grade nitrogen from readily available compressed air and are the ideal choice for your brewery process

Parker Balston WineMaker Series Nitrogen Generators

Generating your own nitrogen eliminates the hassles of supplied cylinders, dewars or bulk nitrogen. A nitrogen generator dispels any concerns about lines icing up, running low, or running out of nitrogen.

PoleStar Smart-E Refrigeration Dryers

Parker Industrial Gas Filtration and Generation Division recently announced that the launch of their new cycling refrigerant dryer series, PoleStar Smart-E (PSE) Series, will be coming in April 2021.

Parker Velcon CDF-X™ EI 1588 Qualified Water Barrier Filters

Parker Velcon is officially launching their highly anticipated CDF-X™ EI 1588 Qualified Water Barrier Filter (WBF) – the only true drop-in replacement for 2” SAP monitor cartridges for aviation fuel filtration.

ISO Cleanliness Guidelines for Hydraulic & Lube Oils

Studies show that approximately half of lost machine life is due to mechanical wear and approximately 80% of mechanical wear is caused by particle contamination in the oil. When oil is kept clean, wear rates go down and component service life goes up.

Submitted by Mott Corporation
Mott GasShield® Point-of-use Penta® Nickel Bulk Filters

Learn how semiconductor wafer fabs are improving the safety of their bulk oxygen gas systems using Mott's GasShield® Point-of-use Penta® Nickel Bulk Filters and why sintered nickel powder provides the best protection against Oxygen ignition.