Power Generation Resources
Power Generation
For new liquid filtration applications – or if you are considering upgrading your system – consider the benefits of Cardinal's High Flow Cartridges over traditional 2.5” pleated or depth filters.
ZWICK's check valve TRI-CHECK combines all the benefits of their TRI-CON Series in a non-return valve. Triple-offset design with a wide seat angle and a true cone in cone, no rubbing while moving and absolute zero leakage performance.
TRI-CON valves incorporate a unique third offset with a 25-degree incline, eliminating the friction between the laminated seal ring and the body seat. The resulting camming action allows the stainless and graphite laminated seal ring to seat into an inclined 25-degree body seat. Learn more.
In Jon Monsen's book, Control Valve Application Technology (published and distributed by Valin Corporation), Jon explains how to properly size and select a control valve. Jon recently received inquiries from customers interested in a further explanation of one of the graphs featured in his book. This article will cover that explanation.
We think of routine care and maintenance of a system to stave off failures as standard practice, but what about preventive maintenance of the replacement parts used when the system does fail?
A manufacturer of natural gas-fired steam generators contacted Valin regarding a problem they were having with contamination. Valin delivered a new filtration solution that provided a higher confidence in the purity of their gas, and reduced the number of filter cartridge kits that they will need.
A local power plant was having issue with clogged nozzles. The nozzles that spray the ammonia to neutralize the NOx began to clog forcing the customer to take the units off line. Valin designed and assembled a turnkey filtration system that consisted of 10 filtration assemblies. Learn more.
In Watlow catalogs, brochures and web pages there is a category of controllers listed as “Limits and Alarms”. It is not always clear to everyone when to use these controllers or which type of controller to use. This document is an attempt to clear up some of these issues.
Occasionally questions come up with regard to calibration of Watlow controllers. This paper will attempt to address some of the more common questions on this subject. Many people want to jump in right away and begin performing a calibration procedure before verification. Before you would attempt to calibrate a Watlow controller, verify that the controller is in need of calibration. If you verify that readings of the controller first, you may not have to go through the more involved process of changing the calibration settings.
To comply with the Clean Air Act, a coal-fired power plant needed to heat flue gas to 455°C (850°F). Watlow engineered a customized design that would meet the customer's needs.
A lesson for me is that I need to involve you earlier in the program.
You were tireless in your support and it will not be forgotten!