Pharmaceutical

The Motion Control Show, Episode 21: Linear Encoder Errors

You may be at the point of looking at adding feedback to your mechanics in order to make them more precise or to capture some of the errors I discussed last episode in Episode 20. But, you may also be wondering about some of the problems that can cause.

Actril™ & Minncare™ Cold Sterilant

Concerned about COVID-19 Coronavirus? Cantel recently had a third-party laboratory verify the efficacy of its Actril™ and Minncare™ Cold Sterilant on hard, non-porous surfaces. The test demonstrated a complete inactivation of the 229E human coronavirus strain in 5 minutes at room temperature when used according to label instructions.

The Motion Control Show, Episode 20: Do I need feedback?

I have a question for you:  Do you embrace linear encoders?  Or do you avoid them whenever possible?  Or are you wondering what a linear encoder even is?  After all this sizing and selecting of mechanics, and even designing your own mechanics, you might be considering putting a feedback device on there and whether you should or not.

The Motion Control Show, Episode 19: What do I need to know to select mechanics?

LOSTPED is an acronym where LOSTPED stands for Load, Orientation, Speed, Travel, Precision, Environment and Duty Cycle.  But, what does it REALLY mean?

Join Valin at ATX West in February

Please join us February 11 - 13 in Anaheim, CA for the Automation Technology Tradeshow, ATX West. Valin will be exhibiting at the show where you will get to see the latest technology.

Parker OFAS Oil Free Air System

Compressed air contamination problems can be simply avoided by installing a Parker Zander OFAS HL Oil Free Air System fitted (including OIL-X filtration). The fully integrated heatless compressed air dryer and filtration packages are suitable for use with any compressor type. Learn more.

Submitted by Tim Tritch || Valin Corporation

Selecting the correct filter for the application should be approached from a methodical, questioning angle. If filters are application specific, meeting filtration specifications, physical and chemical conditions of the process must be considered before selecting the filter for the application.

Submitted by Mark White - Compressed Air Treatment Applications Manager, Parker Hannifin

This white paper explains the differences between oil lubricated and oil-free compressor technologies, the contamination risks associated with each, and how to mitigate those risks by installing the correct purification equipment required to deliver clean, dry, “Technically Oil-free Compressed Air”.

Submitted by Corey Foster || Valin Corporation
The Motion Control Show, Episode 18: End of Travel and Home Sensors vs Absolute Encoders

A common topic when putting together a motion control system and a gantry is whether to use end-of-travel limit switches, home sensors or absolute encoders. This really depends upon the application. So, let's talk about the pros and cons.

Submitted by Corey Foster || Valin Corporation
The Motion Control Show, Episode 17: The Holistic Approach

You cannot just start on the mechanics, pick the motors, pick the drives, pick the controls, pick the HMI.  First you must understand everything all together.  Since we're talking about mechanics, there's a few things we need to kind of jump on right off the bat.  To figure out the holistic approach, there's a lot more to it.