Walchem Software Upgrades

Walchem has added a ton of new features to their W100, W600 & W900 series controllers built around requests from their customers. Included in our 3.31 software upgrade are:

W900 Series

W900 Series
NEW!
  • Dual Switch Control ModeW900 Series Controller
  • Flowmeter Ratio Control Mode
  • Boolean Logic Control Mode
  • Tank Level analog input type
  • Remote Modbus digital input type
  • Remote Modbus virtual input type
  • Periodic Datalog with 24-hour running average of input Minimum, Maximum and Average, Flow Totals, Total relay, virtual output and DI State on-time, and average % output for analog and virtual outputs.
  • Notepad webpage
  • Added On Delay and Off Delay settings for relays using Alarm Control Mode
  • Added Alarm Suppression based on the state of Digital Inputs
  • Added Korean language support
  • If alarms are suppressed, then datalogging is also suppressed
  • Added the ability to limit the daily maximum activation time for control outputs
  • Fractional Units/Pulse in Counter Control Mode with the number of decimal places determined by the High Alarm setting
  • Improved webpage responsiveness to smaller device screens
  • Modbus and BACnet key is now retained through a Reset Defaults command
  • Remote One-Point Process Calibration over Ethernet
  • Remote Software Upgrades over Ethernet
  • Remote Configuration File Import and Export over Ethernet
  • Option to attach a System Summary file to Alarm email reports
  • Choice of Light or Dark webpage color schemes (upon upgrading to v3.31, the Light color scheme will become the default)
  • Added the ability to easily send a Test Email to help verify email settings
  • System Log now captures the IP address of devices connecting over Ethernet
  • Added a manual End Temporary Ad-Hoc Mode button for WiFi connections
  • Enhanced Password Security
    • Complies with new regulations banning identical default passwords
    • After upgrading, on first login the user will be prompted to change passwords
    • New controllers will use the serial number as the unique password, not the same password for all controllers
       
Download Walchem W900 Series Controller Brochure

W600

w600 Series Controller
NEW!
  • Notepad webpage
  • Dual Switch Control Mode
  • Flowmeter Ratio Control Mode
  • Digital Input Counter input and Counter Control Mode
  • Added On Delay and Off Delay settings for relays using Alarm Control Mode
  • Added Alarm Suppression based on the state of Digital Inputs
  • Added Korean language support
  • If alarms are suppressed, then datalogging is also suppressed
  • Fractional Units/Pulse in Counter Control Mode with the number of decimal places determined by the High Alarm setting
  • In conjunction with an improved Ethernet option board;
  • BACnet capability added with installation of the Modbus/BACnet key file
  • TLS/SSL email support
  • Improved webpage responsiveness to smaller device screens
  • Modbus and BACnet key is now retained through a Reset Defaults command
  • Remote One-Point Process Calibration over Ethernet
  • Remote Software Upgrades over Ethernet
  • Remote Configuration File Import and Export over Ethernet
  • Option to attach a System Summary file to Alarm email reportsW600 Cu/Ni Controller
  • Choice of Light or Dark webpage color schemes (upon upgrading to v3.31, the Light color scheme will become the default)
  • Added the ability to easily send a Test Email to help verify email settings
  • System Log now captures the IP address of devices connecting over Ethernet
  • Enhanced Password Security
  • Complies with new regulations banning identical default passwords
  • After upgrading, on first login the user will be prompted to change passwords
  • New controllers will use the serial number as the unique password, not the same password for all controllers
  • For WCU and WNI controllers
  • Added the ability to manually set the current number of metal turnovers
  • Increased number of decimal places for the metal turnovers

Download Walchem W600 Series Controller Brochure

 

W100/P100 Series

NEW!
  • Added On Delay and Off Delay settings for relays using Alarm Control Mode
  • Added Alarm Suppression based on the state of Digital Inputs
  • Added Korean language support
     

Download Walchem W100 Series Controller Brochure


Products shipped starting July 13th will include this latest software upgrade. Software upgrade files for installed controllers will be available July 10th.

Call us today at (855) 737-4715 to learn more, or fill out our online form and someone will get back to you.