Parker Manifold - Hi-Pro Series
![](https://www.valin.com/sites/default/files/manifold-hi-pro_1.png)
The Hi-Pro manifold valve is available in block and bleed and also double block bleed and block configurations, with a 10 mm primary isolate ball valve and a choice of ball or needle valve for the secondary isolate or vent/bleed function. As standard, the manifolds feature 1/2" female NPT inlets and outlets, with 1/4" female NPT vent/bleed, with an exceptionally wide range of connection options that includes tube and pipe socket and butt weld, BSPT and BSPP, Parker CPI© single ferrule and A-LOK™ double ferrule compression fittings.
As standard, all the ball valves that are used in Parker’s Hi-Pro manifold valve have PTFE seats and gland packing, with PEEK seats and graphoil gland packing available as options. The globe style needle valves have a self centering, non-rotating spindle tip, PTFE gland packing and metal-to-metal seats to ensure 100% bubble-tight shut-off. For gas applications, alternative soft tip materials are PEEK and PCTFE. As standard, Parker’s Hi-Pro series manifolds are manufactured from 316 stainless steel as well as other corrosion resistant alloys.
Parker Manifold - Hi-Pro Series Markets:
- Oil and Gas Offshore
- Oil and Gas Onshore
- Petrochemical
- Chemical
Parker Manifold - Hi-Pro Series Features/Benefits:
- Two piece body design - minimal leakage paths
- 4:1 Pressure boundary designed safety factor
- Designed to comply with requirements of ANSI/ASME B16.34 where applicable
- Bi-directional
- Floating ball principal with dynamic response seats featuring inherent self relief
- Integral compression ends available eliminating taper threads and thread sealants
- Low torque operation
- Quarter turn positive stop handle with ergonomically designed protective sleeve
- Full hydrostatic and low pressure air tested
- Anti static
- Optional firesafe designed to meet API 607, BS6755 Pt2.d
Parker Manifold - Hi-Pro Series Applications:
- Instrumentation lines
- Process isolation
- Topside umbilical termination units
- Hydraulic power units
- Chemical injecttion skids
Parker Manifold - Hi-Pro Series Tech Specifications:
INLET CONNECTION: 1/2 NPT FemaleOUTLET CONNECTION: 1/2 NPT Female
CONFIGURATION: Block and Bleed, Double Block and Bleed
VENT SIZE (INCH): 1/4 NPT Female
MAXIMUM PRESSURE (BAR): 414 , 689
VALVE CONFIGURATION TYPE: Block and Bleed, Double Block and Bleed
MATERIAL: 316 Stainless Steel std, Monel, Duplex, Hasteloy, 6Mo, Inconel 625
VALVE TYPE: Ball-Needle, Ball-Ball, Ball-Needle-Ball, Ball-Ball-Ball, Ball-Needle-Needle
MAXIMUM WORKING PRESSURE (PSI): 6000, 10000
MAXIMUM WORKING PRESSURE (BAR): 414 , 689
ADDITIONAL OPTIONS: BSPTr, BSPP, BW, SW, PTFree Connection styles
PACKING MATERIAL: PTFE as standard, graphite optional
MANIFOLD TYPE: 2 Valve, 3 Valve
Contact us at (855) 737-4714 to learn more, or fill out our online form.
A lesson for me is that I need to involve you earlier in the program.
You were tireless in your support and it will not be forgotten!