Productivity Enhancement Setting for CX-Programmer

Submitted on Thu, 11/04/2021

Productivity Enhancement Setting for CX-Programmer

Valin's engineers, most with more than 20 years of experience working with Omron products, suggest the settings below to make CX-Programmer easier to use and more productive. Customers may choose to try other option settings to enhance their experience with CX-Programmer, but these options will help you get started.

STEP 1: Select "Tools/Options" from the CX-Programmer menu


STEP 2: On the "Diagrams" tab, uncheck "Show in simple dialog mode"


STEP 3: Click on the "PLCs" tab and uncheck "Confirm all operations affecting the PLC

Step 3

STEP 4: Click on the "Ladder Information" tab. Select the options circled in red below. Note: Under "Lines", the more lines you add here, the more comment information will be visible.

Step 4

STEP 5: Click "OK" when done

STEP 6: In the tool buttons, find this button and click it so that it is selected as shown below.

Step 6


Productivity Enhancement Settings for Sysmac Studio

Valin’s Engineers, most with more than 20 years Omron experience, suggest the settings below to make Sysmac Studio easier to use and more productive. Customers may choose to try other option settings to enhance their experience with Sysmac Studio.

STEP 1: Select "Tools/Options" from the menu

Step 1
















STEP 2: Adjust settings in the three indicated selections per below examples
  • Ladder
  • ST
  • Variables
Step 2






















STEP 3: For Ladder and ST: Select the boxes as shown here

Step 3






STEP 4: For Variables: Select the radio button as shown here

Step 4








STEP 5: This message will appear, click "OK"

Step 5



 




Virtual Training Classes


Omron Practices Guide for NX1P Programming


For technical support, please call our Automation Knowledge Center at (855) 737-4716, or email us at automationsupport@valin.com.