Diesel Oil Leak Detection Solutions for Generators

For many facilities, emergency generators are the last line of defense when there is a utility failure or a catastrophic event. Non-detected diesel oil leakage on generators (which are often located in areas without daily inspection) can be extremely detrimental with potentially severe consequences, especially in data centers, health care sites, airports, or critical mission facilities.

The TTK diesel oil leak detection solutions for generators are specially designed and developed to protect diesel generators and their supporting diesel system as storage tanks and diesel distribution pipes.

TTK diesel oil leak detection system consists of two essential parts: addressable sense cables / point sensor and digital leak monitoring panel.

Diesel Sense Cable

The addressable cable provides fast and selective detection of diesel leak upon contact, along the entire length, standard length sense cable provided with built-in plug-socket connector.

Learn more about TTK's FG-OD Hydrocarbon Sensing Cable.

Diesel Point Sensor

Fast response to diesel, re-usable and easy to install and remove. Suitable to be installed at low points or inside the storage tank containment tray (if any).

Learn more about TTK's FG-ODP Hydrocarbon Point Sensor.

Advantages of TTK Diesel Leak Detection Systems

• Early detection with accurate location of leaks (precision to section length).
• Reliable detection not affected by water or pollution.
• Multiple leaks can be detected thanks to the unique address of each sense cable.
• Truly versatile system: both diesel and water sensing cables can be connected on a single FG-NET monitoring panel.
• Flexible solutions available for monitoring small, medium, and large areas.
• Cost savings with re-usable oil sensors.
• TCP/IP connection, MODBUS integration.
• Easy installation and extension; plus, friendly maintenance.
• Can be used in hazardous areas with explosive atmosphere.

Digital Leak Monitoring Panel – They are designed to collect and transmit information from the sense cables (or point sensors) to local panel and/or remote Building Management System via JBUS/MODBUS protocol.

TTK offers a range of monitoring panels to suit different installation scales and situations.

 

Call us today at (855) 737-4718 to learn more, or fill out our online form and someone will get back to you.

Printer-friendly version